Parker Yacht
Senior Swabby
Last Activity: Today, 12:18 PM
Joined: 11-20-2014
-
I don't believe there is a spacer on those midsections?... -
Give it respect. Used properly it will work well. Used improperly it will add weeks worth of work to your project....Leave a comment:
-
Yes. Either Stikit or Hookit.
Most of them are Hookit these days. -
A skilled person with this, 36grt. And a Makita grinder.
...Leave a comment:
-
THAT is the wrong tool for the task at hand. -
Well, you have oil pressure, the fact the oil came out at the speed it did is evidence of that.
You do need to see that your low OP and High Temp... -
What do you mean by a "flap disc"?
A file will take FOREVER.
A skilled person with a 36grt and 8" Softpad is the trick....Leave a comment:
-
You should be seeing "00" when the boat is not moving.
(--) means it not connected. Or as Andy stated bad gauge....Leave a comment:
-
How is it getting the speed info?
Pito tube on engine or GPS input?...Leave a comment:
-
I'd hit it. Right in the Danger Zone on the hot crazy matrix. -
Hell no. You can handle a Kiwi and his family. Shit, he might bring you dolphin. Ya'll gotta drive to Mexico to get them on that side. -
You cannot "see" the level on a lower unit. Pull the drain plug. Leave the vent plug in. Just check for water and metal filings. You may want... -
I hate to say this.
Sanibel or Captiva Island.Leave a comment:
-
Hey. Be happy then didn't say Shipyard Island. -
Before you replace the Guage, I would contemplate going to a single Command Link Gauge. Get rid of all the gauges and the fuel sensors. Or find a three...Leave a comment:
-
Well damn. That is a surprise....Leave a comment:
-
A .338 Lapua would do it, Or a .300wm.
But, that's a pretty good hole....Leave a comment:
-
I have no idea what a Silver Back is?
Are we talking Michelle here?
I never called her a linebacker, but, if someone did, that's still different...Leave a comment:
-
The fact there are "--" means it's not communicating, or connected.
...Leave a comment:
No activity results to display
Leave a comment: