SIM
A Nobody Really
Last Activity: Yesterday, 07:10 PM
Joined: 11-20-2014
-
High rpm shifting from one gear to another. Most common to us is seal failure, which leads to the gear lube getting dumped out unknowingly to the owner.... -
If you go to step 4, it says start the engine. So 2 and 3 are with the engine not running. It will feed to the oil pump by gravity, since the tank is...Leave a comment:
-
See attached. 2nd page. HPDI Break-In and Oil Bleed Instructions.pdf
I would also go as far as removing one or two of the oil injection hoses...Leave a comment:
-
Insert Jeopardy music hereLeave a comment:
-
With the engine idling normally, the lever should be as close as it can be without touching. That is where we set them.
If you are seeing...Leave a comment:
-
They are still engines, that doesn't change. But the way they are controlled, very much changed. It really helps to be educated on the systems for troubleshooting....Leave a comment:
-
Seems like a interesting man, sorry for your loss Ole....Leave a comment:
-
They are 2 different displays. They both connect up the same. The 403 replaces the discontinued VV4. Are you rigging new or replacing a SC5000 that has...Leave a comment:
-
That a good one. Shared on FBLeave a comment:
-
Yes we do. veradoclubparts.com If you don't find what you need there, send me what you need and the engine serial number to andyjr@shipyardisland.c...
No activity results to display
Leave a comment: