Prop Advice for Mako 230 with yamaha 175

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ken2
    replied
    definitely a possibility

    Leave a comment:


  • sony224422
    replied
    Ken apparently his prop is a quicksilver 15.25x15 and he had those results with it. I am wondering if he has engine problems if he isn’t getting full rpm

    Leave a comment:


  • sony224422
    replied
    Thanks Ken, I tried to get him to go stainless but he has ruined 2 props and one lower unit. He thinks gps aren’t accurate

    I ended up ordering ALUMINUM 15 PITCH X 15 1/4 DIAMETER STANDARD ROTATION PROPELLER 6G5-45941-00-00 from SIM. Thanks again

    Leave a comment:


  • ken2
    replied
    Looking back at emails, guy's with 250 HP were running low 40's. 42-44 MPH at wide open.
    I'd expect about 36 MPH with a 175.
    If you go aluminum, I'd go 15 pitch, with a 175 Carb Yamaha, 1.86 gear ratio and 4500-5500 RPM range.
    stick with yamaha brand aluminum. You can probably get it from SIM or Parker Yacht on here.

    Leave a comment:


  • sony224422
    started a topic Prop Advice for Mako 230 with yamaha 175

    Prop Advice for Mako 230 with yamaha 175

    I am looking to replace the Prop on my fathers boat, he says he can't get over 4800 RPM right now with the current prop (I have to go get the size, but its a random one he picked up at west marine years ago) He does a lot of shallow water "exploring- hitting the bottom" so he would need an aluminum prop. Its a 1988 175extg engine, and a mako 230 walkaround that usually has 2 people on it and full tank of gas, he just wants overall performance. Would I want something around a 15.25x15 or 14.25 X 17?
Working...
X