Trophy 2102 with Mercury 150 Fourstroke

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trophy 2102 with Mercury 150 Fourstroke

    Worked with Ken @ propgods to dial in the RIGHT Stainless prop for my boat. Stock Alum Black Max 17P had lost most of its paint on the blade sections. With that much flex and slip it was sluggish getting up on plane. WOT was 39 mph @ 5400. Ken suggested I go with the Q3 15P. Holeshot improved instantly, cruise improved and at a lower rpm and I managed 40 mph @5500 rpm. I found going with his suggested flo torque 4 hub greatly improved gear clunk when shifting and idle speed rattle. His knowledge is invaluable and his prices are pretty good too!

  • #2
    Sounds great, help, give me an average fuel burn!.
    Thanks,
    BWP

    Comment

    Working...
    X