Prop recommendation single Honda BF 150A

  • Filter
  • Time
  • Show
Clear All
new posts

  • Prop recommendation single Honda BF 150A

    Recently re powered a 1995 19' Grady White Tournament from a 150hp 2 stroke Johnson Ocean Runner to a 2018 4 stroke Honda BF 150A. The Boat weighs about 2600-3000 with engine and full tank of gas. The aluminum prop that came with the engine is a 14 1/2 D x 19 P . Rpms get up to 5800 @ WOT and can get up to 40mph with a clean bottom.
    I am ok now with the way it performs but miss the handling when docking I seemed to have had with the old 2 stroke.
    I am looking at purchasing a Solas Hr Titan 4 Blade prop 14.25 X 17 Rh Stainless.
    I usually travel around 20mph, don't need the speed but would like to have the boat plane out quicker too.
    Any advice would be appreciated.

  • #2
    That Solas 4 blade would probably do well.
    What prop did you use to run on your two stroke Johnson?

    Ken Reeves
    [email protected]


    • #3
      I wish I knew the answer to that question. I re powered the boat a few weeks after purchasing it. I couldn't put up with the smoke, noise and the large amount of fuel I was using. Thank You for responding.