I-Command

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • I-Command

    I have a 2014 Evenrude 115 E-Tec. If I install the I-Command gauge 766024 and NMEA starter kit 124-69, will I be able to see how much fuel I am using, burn rate? What other things will I be able to see with just the basics?

  • #2
    I don't know much about the newer ETEC's or I Command, but if it is NMEA capable, you should be able to see all that, on both the I Command and the MFD if it's hook in.
    Engine Sales and Service
    Ph +1 954.463.1515
    Fx +1
    954.463.4904
    Toll Free: 800.622.6747

    oparker@parkeryacht.com
    www.parkeryacht.com

    Member of the MSHS Group

    Comment


    • #3
      You can see all the basic. RPM, GPH, at a minimum. Sometimes you can also get trim, temp and more. I don't think there is any documentation around to let you know exactly what you'll get in every scenario, but you can get the two most valuable for sure, GPH and RPM. This is the same gauges as the Lowrance LMF400 but with software specific to your engines.

      Jim Maier - www.BOEmarine.com - 866-735-5926 x104 - jim@boemarine.com

      Comment


      • #4
        Thanks for the responses. Trying to get an idea of what I would get before I spent a bunch of money on stuff that may not give what I want.

        Comment

        Working...
        X